Split Corner Bed Skirt

Split corner bed skirt for four-poster beds, sleigh beds, upholstered frames and any bed with a footboard or corner post — all four corners open with a 2 in. overlap so the frame passes through cleanly. Our split corner bed skirt is 100% combed long-staple cotton at 240 gsm on a 110 gsm silicone-grip decking, with the same 1 in. double-turned blind-stitched hem at every visible edge.

Why a split corner bed skirt exists

If your bed has a footboard, posts, or side rails that rise above the base, a continuous bed skirt cannot physically be fitted. People try. The usual outcome is a skirt cut with scissors at two corners, fraying within a month, with the raw edges visible from the door. A split corner bed skirt is made for the situation instead of hacked into it.

How the open corners work

All four corners are open, and each opening carries a 2 in. overlap so the two panels sit one behind the other. From standing height the corner reads as closed; from directly in front of it the frame passes through cleanly. Both edges of every opening are finished with the same 1 in. double-turned blind-stitched hem as the bottom edge, so nothing frays and nothing curls.

Specifications

• Corners: All 4 open with 2 in. overlap
• Panels: 100% combed long-staple cotton, 240 gsm
• Decking: 110 gsm brushed polyester with silicone grip lines
• Hem: 1 in. double-turned blind-stitched at every visible edge
• Drops: 15 in. or 18 in.
• Colours: Alabaster, Bone, Fog Grey, Sable, Clay, Sage, Ink

Which beds a split corner bed skirt fits

Split corner bed skirts are the correct cut for four-poster beds, sleigh beds, most upholstered frames with a raised footboard, and any bed with a visible corner leg. It is also, incidentally, the easiest cut to fit and remove on a conventional bed, because the open corners let you feed the decking in from the side rather than lifting the mattress square off the base.

Split corner bed skirt size guide

One fitting note specific to split corner bed skirts

Set the overlap so the front panel sits on the side you look at from the door — the corner reads as a single closed line from that angle, and it is the only angle anyone sees it from.

Measuring for a split corner bed skirt

Measure from the floor to the top of the base, not to the top of the mattress. Choose 15 in. or 18 in. — whichever is closer without going under.

How to care for your split corner bed skirt

• Machine wash warm on a normal cycle
• Tumble dry low
• Hang damp — the cotton weight pulls creases out
• Skip fabric softener — coats the grip lines

Frequently asked questions

What is a split corner bed skirt?

A bed skirt with all four corners open (with overlapping panels) rather than sewn shut — designed for beds where corner posts or footboards would otherwise prevent a continuous skirt fitting.

Do split corner bed skirts fit four-poster beds?

Yes — that’s the primary use case. Also sleigh beds, upholstered frames with raised footboards, and any bed with a visible corner leg.

Will a split corner bed skirt show the base through the openings?

No — the 2 in. overlap on each corner closes the gap visually. From standing height the corner reads solid; only the bed frame passes through when needed.

Are split corner bed skirts harder to fit than tailored?

Easier, actually — the open corners let you slide the decking in from the side rather than lifting the mattress off the base.

Complete the four-poster bed

Layer with matching cotton bed sheets, coordinated duvet covers and coordinated pillowcases. For related bed skirt fittings, see our Tailored Bed Skirt and Wrap Around Bed Skirt.